|
| | Shop History Projects
Back to Wood Working
Over the years, Perry has custom designed and
built many wood working projects. These photos are some examples of a few
projects.
Dining room table built from leftover milled fir that was used to build the cabin. The island bar in the cabin. The island bar in the cabin. Cafe doors at the main entrance closet of the cabin. TV stand with drawers for DVD/VCR built from the milled fir leftover from the cabin construction. Guest bath room vanity at the cabin. Master bath room vanity at the cabin. Bakers Rack built December, 2002. Hall entry cabinet made with atler. This is a custom design used as a wall display case made of oak. The wall display case was made of alter. A set of hexagon end tables were made of birch. A set of hexagon end tables were made of birch. A small night stand with a drawer make of oak. A custom designed china hutch. This corner oak cabinet was used in a kitchen. This large project for a 42" TV was 109" wide by 68" tall. Over 150 bd ft of stock oak when into this project. It was designed in three sections. A design for a child dresser. Several students desks left the shop. The desk was made with alter. Some pine projects seemed to make it through the shop. Usually with matching dressers and night stands. This cedar patio bird house bench was something I had noticed as a hot item. I just had to build a few. Simple but functional fishing rod holder to mount on the wall. Many small or utility boxes were built. This one is a mobile fly tying box. A cedar chest built all from stock cedar. Kitchen remodel at 966 Centennial in Pocatello. Kitchen utility cabinet with microwave shelf. The cabinet has a trash pull-out drawer, broom closet, and cookie pan holders. The remodeled kitchen of a previous owned home in Pocatello, Idaho. I built this kitchen with an island stove.
Dining room table built from leftover milled fir that was used to build the cabin.
|
Back to Top
|
